China High Tension Hot Dipped Galvanized Steel Wire Manufacturers & Suppliers -tl-steelwire.com

Description of this China High Tension Hot Dipped Galvanized Steel Wire

High pressure hot dip galvanized steel wire is mainly used for communication equipment, medical equipment, metal mesh weaving, brush, wire rope, filter, high pressure pipe, construction, etc. After hot-dip galvanized wire zinc coating,Galvanized Spring Steel Wires the amount of zinc is 40-200 grams/square meter, It is carbon steel wire galvanized on the surface by means of hot plating or electroplating. Its performance is the same as that of straightening tempered steel wire. Can be used as unbonded prestressed steel, but at least 200~300g of zinc per square meter area the tensile strength is 450-650mpa, the specification is 2.0-5.4mm,High Quality Steel Wires the wire surface is smooth and white. To protect metal from corrosion to some extent; Used as primer before painting to improve adhesion and corrosion resistance of paint film;carbon material Steel Wires It is used for friction reduction and lubrication in cold metal processing. galvanized spring steel wire Electric galvanized steel wire zinc layer thin, the amount of zinc 5-15 grams/square meter, low cost and low price.

Parameters of this High Tension Hot Dipped Galvanized Steel Wire Manufacturers

Nominal diameter of wire	Diameter deviation allowed	Nominal tensils strength Mpa	Elonggation Lo=200mm%
1.00	±0.05	900-1200	7.5
1.10
1.20
1.30
1.40
1.50
1.60
1.70
1.80	±0.06
2.20	±0.06
2.40	±0.08
2.60
2.80